Search

Follow:

The range of Qbus dimmermodules goes from standard dimmers to dim halogene or incandescent lights over universal dimmers for any load to 0/1-10V dimmers to dim analogue circuits or energy savings lamps.

Add to cart
ANA01

1 OUTPUT 0/1-10V ANALOG OUTPUT MODULE

Input Modules exist in both DIN rail format to be mounted in the enclosure, as well as in a smaller format to be included in the in-wall mounting box of a switch. Via input modules, external contacts such as standard switches, window and door contacts, all kinds of detectors, garage doors and the like are connected to the Qbus system

Add to cart
INP02

2 INPUTS POTENTIAL FREE MODULE

The range of Qbus dimmermodules goes from standard dimmers to dim halogene or incandescent lights over universal dimmers for any load to 0/1-10V dimmers to dim analogue circuits or energy savings lamps

Add to cart
DIM02SA/500U

2 OUTPUTS 10-500VA, 3 INPUTS UNIVERSAL RELAY MODULE

In a Qbus system, motor control (for shutters, screens,…) can be done centrally (from the electrical distribution board) or decentrally (with a module on the bus closeby the motor).

Add to cart
ROL01

2 OUTPUTS 8AMP. 2 IINPUTS SHUTTER MODULE

In a Qbus system, motor control (for shutters, screens,…) can be done centrally (from the electrical distribution board) or decentrally (with a module on the bus closeby the motor).

Add to cart
ROL02P

2 UP/DOWN OUTPUTS 230V SHUTTER MODULE WITH POSITIONING

The range of Qbus dimmermodules goes from standard dimmers to dim halogene or incandescent lights over universal dimmers for any load to 0/1-10V dimmers to dim analogue circuits or energy savings lamps.

Add to cart
ANA04

4 OUTPUTS 0/1-10V ANALOG DIMMER MODULE

The range of Qbus dimmermodules goes from standard dimmers to dim halogene or incandescent lights over universal dimmers for any load to 0/1-10V dimmers to dim analogue circuits or energy savings lamps.

Add to cart
DIM04SA/500U

4 OUTPUTS 10-500VA, 5 INPUTS UNIVERSAL RELAY MODULE

The range of Qbus dimmermodules goes from standard dimmers to dim halogene or incandescent lights over universal dimmers for any load to 0/1-10V dimmers to dim analogue circuits or energy savings lamps.

Add to cart
ANR04SA

5 INPUTS, 4 ANALOG DIMMERS AND 4RELAYS 16AMP./230V CONTROL MUDULE

Input Modules exist in both DIN rail format to be mounted in the enclosure, as well as in a smaller format to be included in the in-wall mounting box of a switch. Via input modules, external contacts such as standard switches, window and door contacts, all kinds of detectors, garage doors and the like are connected to the Qbus system

Add to cart
INP08

8 INPUTS POTENTIAL FREE MODULE

The CTD Controller (Patent Pending) is the heart of your QBus system. The Controller controls and supplies power to all Qbus modules connected via the usual two-wire bus: flexible and easy to install. Each controller has an on-board SD memory card on which all actions that happen on the bus are stored. That data can be used by the Qbus EQOmmand software to visualize, predict and optimize energy consumption. Each CTD has a standard USB port to adapt your system to your liking in an easy way. Optionally, each controller can have an Ethernet port via which you can securely communicate with your controller over the internet.

Add to cart
CTD01E+

BASIC CONTROLLER

The CTD Controller (Patent Pending) is the heart of your QBus system. The Controller controls and supplies power to all Qbus modules connected via the usual two-wire bus: flexible and easy to install. Each controller has an on-board SD memory card on which all actions that happen on the bus are stored. That data can be used by the Qbus EQOmmand software to visualize, predict and optimize energy consumption. Each CTD has a standard USB port to adapt your system to your liking in an easy way. Optionally, each controller can have an Ethernet port via which you can securely communicate with your controller over the internet.
Add to cart
CTD02E

CONTROLLER “FULL” WITH USB ETHERNET

The CTD Controller (Patent Pending) is the heart of your QBus system. The Controller controls and supplies power to all Qbus modules connected via the usual two-wire bus: flexible and easy to install. Each controller has an on-board SD memory card on which all actions that happen on the bus are stored. That data can be used by the Qbus EQOmmand software to visualize, predict and optimize energy consumption. Each CTD has a standard USB port to adapt your system to your liking in an easy way. Optionally, each controller can have an Ethernet port via which you can securely communicate with your controller over the internet.

Add to cart
CTD03E

CONTROLLER “MAXI” WITH USB ETHERNET

The CTD Controller (Patent Pending) is the heart of your QBus system. The Controller controls and supplies power to all Qbus modules connected via the usual two-wire bus: flexible and easy to install.   Each controller has an on-board SD memory card on which all actions that happen on the bus are stored. That data can be used by the Qbus EQOmmand software to visualize, predict and optimize energy consumption.   Each CTD has a standard USB port to adapt your system to your liking in an easy way. Optionally, each controller can have an Ethernet port via which you can securely communicate with your controller over the internet.

Add to cart
CTD01E

CONTROLLER USB & ETHERNET

Module which counts and processes pulses received from a pulse meter. Any pulse meter can be connected to the ECM04 as long as the contacts are potential-free. The ECM04 can receive a pulse every 250ms. Alarms can be triggered based on a set number of pulses, for example to receive green energy certificates every kW generated by solar panels.

Add to cart
ECM04

ENERGY COUNTER MODULE

You're viewed 16 of 29 products
Load More
Back to Top