Search

Follow:

5 INPUTS, 4 ANALOG DIMMERS AND 4RELAYS 16AMP./230V CONTROL MUDULE

The range of Qbus dimmermodules goes from standard dimmers to dim halogene or incandescent lights over universal dimmers for any load to 0/1-10V dimmers to dim analogue circuits or energy savings lamps.

Qty
SKU:ANR04SA

In Stock

GENERAL SPECIFICATIONS :
Power supply : 230Vac +-10%, 50 Hz – maximum
protection 16A/2P
Insulation voltage : 3 kVac tested
Characteristic consumption : 9VA maximum – all
relays on
Ambient temperature :
Working temp. range : 10°C to 50°C
Storage temp. range : -10°C to 60°C
Maximum humidity : 93%, no moisture condensation

Bus load : 10mA at nominal 13,8V
Internal fuse : 500mA single-phase
Max installation altitude : 2.000 meters.
OUTPUTS : MODES
In Stand-Alone mode, the outputs are by default in
Dimmer Mode with 10% minimum dim level. By using
the buttons on the module, the module can be set in
Relay (ON/OFF) or PWM mode, and the minimum dim
level can be adapted (see Manual Control).
Dimmer and PWM Mode:
o In Stand-Alone, only 1-button dimmer control is
possible. If used with a controller, 2-button control
is also possible.
o Parameters:
In Stand-Alone, minimum dim level can be
selected via the button on the module.
Via a Controller (which can be removed after
changing the mode and setting the values) the
outputs can be configured with a Time Off and
a DimStart (dim level when activating the
output).
When used with a Controller: Fade In and Fade
Out possible.

Your custom content goes here. You can add the content for individual product

Back to Top