GENERAL SPECIFICATIONS :
Power supply : 230Vac +-10%, 50Hz – maximum
protection 16A/2P
Insulation voltage : 3KV tested
Characteristic consumption : 2.8VA
Ambient temperature :
Working temp. range : 10°C to 50°C
Storage temp. range : -10°C to 60°C
Maximum humidity : 93%, no moisture
condensation
Bus load : 10mA at nominal 13,8V
Internal fuse : 6,3AT single-phase
Max installation altitude : 2.000m
OUTPUTS : UP1/2 – DN1/2 : 230V
UP1 – DN1 and UP2 – DN2 : internally locked
contacts
Contact resistance :470m
2 OUTPUTS 8AMP. 2 IINPUTS SHUTTER MODULE
In a Qbus system, motor control (for shutters, screens,…) can be done centrally (from the electrical distribution board) or decentrally (with a module on the bus closeby the motor).
Your custom content goes here. You can add the content for individual product
Related products
Module which counts and processes pulses received from a pulse meter. Any pulse meter can be connected to the ECM04 as long as the contacts are potential-free. The ECM04 can receive a pulse every 250ms. Alarms can be triggered based on a set number of pulses, for example to receive green energy certificates every kW generated by solar panels.
ENERGY COUNTER MODULE
Via the relay modules, outputs can be switched. A relay module has no specific function but can handle any switch functions: monostable (eg a doorbell), bistable (on / off), timer, interval, thermostat output. Some relays can also control motors of blinds, curtains, gates.
RELAY MODULE (2X 16A)
Via the relay modules, outputs can be switched. A relay module has no specific function but can handle any switch functions: monostable (eg a doorbell), bistable (on / off), timer, interval, thermostat output. Some relays can also control motors of blinds, curtains, gates.