GENERAL SPECIFICATIONS :
Power supply : 230Vac +-10%, 50Hz – maximum
protection 16A/2P
Insulation voltage : 3 KV tested
Characteristic consumption : 1,5VA
Ambient temperature :
Working temp. range : 10°C to 50°C
Storage temp. range : -10°C to 60°C
Maximum humidity : 93%, no moisture
condensation
Bus load : 10mA at nominal 13,8V
Internal fuse 500mAT single phase
Max installation altitude : 2.000m
OUTPUTS :
OUT1 – OUT4 : analog outputs 0-10V or 1-10V.
Each output can handle:
Max 5mA (source; 0-10V)
Max 100mA (sink; 1-10V)
PHYSICAL SPECIFICATIONS
Housing : Plastic, self-extinguishing according to
UL94-V0
Protection Degree : IP20, EN 60529
Installation : rapid mounting on DIN-RAIL, width
6 modules
Dimensions (HxWxL) : 62mm x 90mm x 107mm
Weight : approx. 0,321 kg
4 OUTPUTS 0/1-10V ANALOG DIMMER MODULE
The range of Qbus dimmermodules goes from standard dimmers to dim halogene or incandescent lights over universal dimmers for any load to 0/1-10V dimmers to dim analogue circuits or energy savings lamps.
Your custom content goes here. You can add the content for individual product
Related products
In a Qbus system, motor control (for shutters, screens,…) can be done centrally (from the electrical distribution board) or decentrally (with a module on the bus closeby the motor).
2 OUTPUTS 8AMP. 2 IINPUTS SHUTTER MODULE
Module which counts and processes pulses received from a pulse meter. Any pulse meter can be connected to the ECM04 as long as the contacts are potential-free. The ECM04 can receive a pulse every 250ms. Alarms can be triggered based on a set number of pulses, for example to receive green energy certificates every kW generated by solar panels.
ENERGY COUNTER MODULE
Via the relay modules, outputs can be switched. A relay module has no specific function but can handle any switch functions: monostable (eg a doorbell), bistable (on / off), timer, interval, thermostat output. Some relays can also control motors of blinds, curtains, gates.